What Humidity Level Should a UK Home Be?

The ideal humidity in a UK house is 40% to 60% relative humidity indoors. Above 60%, condensation forms on cold windows and walls and the risk of mould rises. Mould grows readily when humidity stays at 70% or more for long periods. In winter, a level near 40% to 50% keeps condensation off windows.

Key facts

  • Healthy indoor humidity: 40% to 60% relative humidity (RH).
  • Condensation and mould risk: above 60% RH.
  • Mould grows readily: 70% RH or more for long periods, especially below 16°C.
  • Kitchens and bathrooms: short peaks above 60% are normal; ventilation should bring them back down within an hour or so.
  • Drying clothes indoors can raise humidity by up to 30%, and by up to 40% on radiators.

What is relative humidity?

Relative humidity is the amount of water vapour in the air, as a percentage of the most the air can hold at that temperature. Warm air holds more water vapour than cold air. When warm, moist air touches a cold surface such as a window, it cools, cannot hold its water, and the water condenses on the surface.

That is why the same amount of moisture causes more condensation in a cold home than a warm one. Heating and humidity work together. Housing providers recommend 18°C to 21°C with humidity of 40% to 60% to avoid damp and mould.

What is the ideal humidity level for each room?

The ideal humidity level for living rooms and bedrooms is 40% to 60%, and 40% to 50% for bedrooms in winter. Kitchens and bathrooms can briefly go higher while you cook or shower.

RoomIdeal humidityNotes
Living room40% to 60%Keep below 60% in winter to stop condensation on windows
Bedroom40% to 50% in winterBreathing overnight adds moisture; a closed, cold bedroom often has the most window condensation
KitchenUp to 60%, with short peaksCooking raises humidity; use the extractor fan and lids on pans
BathroomUp to 60%, with short peaksShowers push humidity high; ventilate until mirrors and walls are clear
Utility room or laundry areaBelow 60%Wet washing releases a lot of moisture; dry it with a dehumidifier or outdoors

Meaco, a UK dehumidifier manufacturer, says the average humidity inside UK homes should be around 50% to 55%. In winter, Meaco advises a target of 40% to keep condensation off windows.

What do different humidity levels mean?

Different humidity levels mean different risks: 40% to 60% is healthy, above 60% brings condensation, and 70% or more lets mould grow.

Relative humidityWhat it meansWhat to do
Below 30%Very dry air; can dry out wooden furniture and floorsRare in UK homes; reduce heating or use a humidifier
30% to 40%Dry but comfortable in winterNo action needed
40% to 60%The healthy range for a UK homeKeep it here
60% to 70%Condensation on cold surfaces; mould risk risingVentilate, heat steadily and consider a dehumidifier
70% to 80%Mould spores multiplyFind the moisture source and run a dehumidifier
Above 80%Very damp; condensation on walls, mould on furniture and clothesRun a dehumidifier daily and check for leaks, penetrating or rising damp

Why is high humidity a problem?

High humidity causes condensation, and repeated condensation causes damp and mould. UK government guidance on damp and mould, produced with the UK Health Security Agency, lists the health effects of living with damp and mould:

  • Respiratory effects: coughing, wheezing and shortness of breath, airway infections, and new or worse asthma, rhinitis, bronchitis and COPD.
  • Eye and skin effects: eye irritation, eczema and itchy rashes.
  • Fungal infections, particularly in people with weakened immune systems.
  • Mental health effects: anxiety and stress linked to living conditions and damaged belongings.

The same guidance names the people most at risk. They include people with asthma, COPD or other lung or heart conditions, and people with weakened immune systems. Pregnant women, new mothers, children, older people and people who are housebound are also at higher risk.

The guidance estimates that 4% to 27% of homes in England have damp and mould, roughly 962,000 to 6.5 million households.

What causes high humidity in a UK home?

High humidity in a UK home comes from everyday activities that release water vapour into the air. The main sources are:

  • Drying washing indoors, especially on radiators.
  • Cooking without lids or an extractor fan.
  • Baths and showers without ventilation.
  • Breathing, especially in small, closed bedrooms overnight.
  • Unvented tumble dryers and paraffin or bottled-gas heaters.

Cold rooms make the problem worse, because cold surfaces turn water vapour into condensation sooner. UK government guidance names condensation as the most common cause of damp in homes. Other causes are penetrating damp from defects in walls, roofs or windows, rising damp from the ground, and leaks.

How do you measure the humidity in your home?

You measure the humidity in your home with a hygrometer, a small meter that shows relative humidity as a percentage.

  1. Buy a digital hygrometer, a small meter that shows relative humidity. Many dehumidifiers have one built in.
  2. Place it at chest height in the middle of the room, away from windows, radiators, kettles and the shower.
  3. Leave it for an hour before you read it, so it settles.
  4. Take readings in each room at the same time of day, ideally morning and evening.
  5. Note any room that reads above 60% on most days. That room needs action.

How do you lower the humidity in your home?

Lower humidity by producing less moisture, removing the moisture you produce, and keeping rooms warm enough that it does not condense. UK government guidance on damp and mould recommends these steps:

  1. Run kitchen and bathroom extractor fans while cooking and showering, and for a while after. A humidity-sensor extractor fan switches itself on when humidity rises.
  2. Keep window trickle vents open and open windows for short periods each day.
  3. Put lids on pans and close internal doors while cooking or showering.
  4. Dry washing outdoors where possible. Indoors, dry it in a small room with one of the best dehumidifiers for drying clothes or best heated clothes airers, not on radiators.
  5. Heat the home steadily, using thermostatic radiator valves to keep each room warm.
  6. Leave a gap between furniture and outside walls so air can circulate.
  7. Run a dehumidifier set to 50% to 55% in rooms that stay above 60%.

Persistent high humidity is a warning sign that the cause needs fixing, not just the visible mould. For step-by-step help, read our guides on how to stop condensation on windows overnight and how to remove mould from painted walls.

What humidity should you set a dehumidifier to?

Set a dehumidifier to 50% to 55% for everyday use, and to 40% to 50% in winter if windows still show condensation each morning. Barrow Borough Council advises setting a dehumidifier below 60% to stop mould forming. Setting it lower than 40% uses more electricity without any benefit. Compare models in our guide to the best dehumidifiers.

Frequently asked questions

Is 70% humidity too high for a house?

Yes. At 70% relative humidity, condensation forms on cold surfaces and mould spores multiply. A UK home should sit between 40% and 60%.

Is 65% humidity too high in a bedroom?

Yes, if it stays at 65% for long periods. Aim for 40% to 50% in a bedroom in winter. Open the window for a few minutes in the morning, leave the door open and run a dehumidifier if the level stays high.

What humidity does mould grow at?

Mould grows readily when relative humidity stays at 70% or more for long periods, and the risk starts to rise above 60%. Cold surfaces below about 16°C make growth more likely.

Is 40% humidity too low?

No. 40% is within the healthy range for a UK home and helps stop condensation in winter. Air only starts to feel too dry below about 30%.

Why is humidity higher in winter?

Homes are closed up, windows and walls are colder, and more washing is dried indoors. Cold surfaces turn water vapour into condensation, so the same moisture causes more damp in winter than in summer.

How we wrote this guide

Product Analyst based this guide on UK government guidance on damp and mould, advice published by UK councils and housing providers, and dehumidifier manufacturer guidance. We did not take our own humidity measurements.

Sources: GOV.UK, understanding and addressing the health risks of damp and mould in the home; Westmorland and Furness Council, damp and mould guide; Barrow Borough Council, damp and mould advice leaflet; Vivid Homes, reducing condensation and mould; Homebuilding & Renovating, interview with Meaco.

Related buying guides